Rollover car wash machine

Rollover car wash machine

Rollover or Trolley type car wash machine (generally called “gantry type car wash machine” or “mobile car wash machine” in Chinese) is an automatic car washing equipment widely used in car beauty, gas stations, 4S stores, commercial car washes, etc. Its biggest feature is that the vehicle does not move, but the car wash machine moves, and the entire cleaning process is completed by the movement of the machine.

Rollover car wash machine

Rollover car wash machine

Working Principle

  • Rollover/Trolley car washers are usually composed of a track system, frame structure, washing and brushing components, high-pressure water system, air drying system and control system:
  • The vehicle enters the designated position and stops
  • The car wash moves forward and backward on the track
  • The pre-washing, car washing, brushing, rinsing, air drying and other steps are completed through the built-in high-pressure water gun, foam spraying system and brush system

Main structure and function

Component nameDescription
Main frameBeam + two side column structure, installed with nozzle, brush, drying, etc.
Track systemGuide the car washer to move back and forth, generally ground-mounted or embedded
Side brushAutomatically sense the body contour, rotate to clean the sides and rear of the vehicle
Top brushAdjust the height up and down to clean the roof and front and back
High pressure water systemSpray strong water flow to wash the body mud and sand
Foam systemCover with foam to improve the cleaning effect
Air drying systemStrong wind blows the body dry to avoid water stains
Control systemPLC + touch screen operation, can set the car wash mode, number of times, etc.

Technical Parameters

Serial numberItemParametersNotes
1Car wash speed180-240 seconds/vehicleVariable frequency speed regulation
2Car wash water consumption60 liters/vehicleAverage of different models
3Car wash power consumption0.4 kWh/vehicleAverage of different models
4Maximum car wash height2000Unit: mm
5Maximum car wash width2100Unit: mm
6Maximum car wash length<5500Unit: mm
7Travel speed7.5m/minVariable frequency speed regulation
8Installed power18KWPower of all electrical equipment
9Installed voltage380V50HZThree-phase five-wire 6-10 flat wire
10Equipment sizeLength 2100*width 3600*height 3000Unit: mm
11Installation sizeLength 10000*width 4000*height 3200Unit: mm
12Structural materialAL-5LFB-02C stainless steel/AL-5LFT-02C carbon steel galvanized spray

Car wash process

Rollover car wash machine

Structure close-up

Car washing machine components

Advantages

  • Simple structure, small footprint: suitable for limited spaces such as cities and gas stations
  • High car wash quality: multi-stage car wash process control is more refined
  • High degree of automation: fully automatic, no human intervention required
  • Low maintenance cost: mature system, universal accessories
  • Good user experience: car owners do not need to move the vehicle, convenient and efficient

Applicable scenarios

  • Car wash area at gas stations
  • Car wash chains
  • Commercial parking lots
  • 4S shop after-sales workshops
  • Commercial property vehicle maintenance points

category

Recommended products

en_USEnglish