As an ecological environment protection equipment that can achieve automatic cleaning of various construction vehicles, with the increasing global demand for environmental protection, construction car washing machines have gradually become familiar to everyone and favored by all sectors of society. It can be said that the use of engineering car washing machines has solved the problem of dust pollution caused by vehicles entering and leaving the site, laying a solid foundation for the long-term development of enterprises.

According to different applications, construction car washing machines can be divided into engineering car washing machines and construction site car washing machines. The engineering car washing machine is mainly suitable for various cement tankers, dump trucks, mobile engineering vehicles, etc. Construction site car washing machines are mainly used for ordinary construction sites to clean various equipment.

Nowadays, engineering car washing machines have been used in many construction sites, garbage dumps, quarries, coal yards, and other places. At the same time, in order to ensure smooth washing of the car, many details need to be paid attention to.

1. Pay attention to the recycling of water

The location of the car washing machine during the installation of the construction site should be reasonably selected, and efforts should be made to avoid washing cars in contaminated areas, otherwise secondary pollution may occur. Therefore, a sedimentation tank should be designed. Ensure clean water recycling.

Because the water in the car wash machine is recycled, washed debris may also be recycled back.. Therefore, we can add a filter at the return water outlet to filter out debris and prevent them from returning to the reservoir.

In addition, water needs to be regularly inspected and replaced. After use, please check if there are any debris in the foundation pit of the car washing machine at the construction site and clean it up in a timely manner to ensure the normal operation of the equipment. Mobile construction vehicles are very dirty. If the water gets dirty, it needs to be replaced.

2. Connect the water pipe to the flushing table and equip it with a high-pressure water gun with a pressure of not less than 8Mpa. The length of the water gun connected to the water pipe should not be less than 10 meters as a backup for flushing.

3. If both nozzles are blocked, it is necessary to turn the nozzle counterclockwise for proper cleaning, and then install the nozzle in its original position. But it should be emphasized that when the hands are not strong enough to securely install the parts, they must be tightened with a wrench.

4. Check if the machine is working properly.

5. Brush once every six months.

Due to the long operation time of the project car wash team leader, who is immersed in water every day, it is easy to cause paint or rust damage, thereby damaging the quality of the car body.. Therefore, the appearance of the car wash machine should be inspected every six months or so. If there is rust, it needs to be painted and maintained in a timely manner to extend its service life.

6. It should also be noted that if the car washing machine is not used for a long time, the power switch needs to be turned off.