Macchina per il lavaggio dei veicoli di ingegneria

The engineering vehicle washing machine is a special equipment specially used for cleaning engineering vehicles such as muck trucks, mud trucks, mixer trucks, excavators, loaders, etc. It is often used in construction site entrances and exits, mixing stations, mines, landfills and other places. The equipment uses a high-pressure spray system, automatic sensing control and sewage circulation treatment system to efficiently remove mud and sand from the vehicle surface and tire chassis, prevent mud from being brought out of the construction area, and comply with environmental protection management regulations.

Main functions

Fully automatic high-pressure washing

The vehicle enters the car washing platform and the system starts automatically;

Multi-directional high-pressure nozzles (top, side, bottom) work at the same time;

The cleaning time is short, generally completed within 30~90 seconds.

Intelligent sensing control

Equipped with infrared, radar or ground sensing sensors to realize automatic vehicle identification;

The system automatically starts/stops without manual operation.

Chassis tire cleaning system

Equipped with bottom counter-spray nozzles and lateral strong spray devices;

Effectively remove mud and debris in wheel patterns and chassis structures.

Circulating water system (environmentally friendly configuration)

The bottom sedimentation tank recycles the cleaning wastewater;

The three-stage filtration system removes the sediment and recycles it;

The water saving rate can reach more than 80%.

Main types

Type	Features
Flatbed car wash machine	Integrated design, small footprint, suitable for frequent access
Pit car wash machine	Installed below ground, stable flushing, neat appearance
Mobile car wash machine	Lightweight structure, mobile deployment, suitable for temporary construction sites and short-term projects
Enclosed car wash room	Equipped with enclosure and fan system, suitable for dust control and winter heat preservation car washing occasions

Technical parametersProject name Parameter range

Item	Parameters
Model	YJ-120
Dimensions	4200mm × 3700mm × 1500mm
Washing area dimensions	3700mm × 3500mm × 1200mm
Washing method	Automatic induction high pressure spray + closed splash protection system
Starting method	Infrared/ground sensing/manual/remote control
Number of nozzles	≥120
Water spray pressure	4-6 kg/cm²
Water pump power	7.5kW×2 units (optional frequency conversion)
Power supply requirements	AC380V / 50Hz
Load-bearing capacity	≥100 tons
Water use method	Recycling (three-level precipitation)
Protection configuration	Ceiling + enclosures on both sides + sealing curtains
Working noise	≤75 dB
Antifreeze device (optional)	Heating cable / circulating heating system

Application scenarios

Construction site (entrance and exit control)

Slag transportation dispatching yard

Commercial concrete mixing station discharge port

Mine entrance and exit

Garbage treatment station / resource recycling station

Government environmental protection supervision requirements area

Product advantages

Efficient and fast

Short flushing time, vehicles do not stop in queues;

Available for all-weather automatic operation.

Water-saving and environmental protection

A full set of circulating water treatment, in line with environmental protection policies;

Effectively avoid sewage discharge and dust pollution.

Intelligent control

Can achieve unmanned operation, integrated remote monitoring system;

Fault alarm, water shortage protection, automatic cleaning function.

Sturdy and durable

With a load-bearing capacity of more than 100 tons, it is suitable for long-term use of heavy vehicles;

The structure adopts thickened steel or hot-dip galvanizing treatment, anti-corrosion and anti-rust.

Construction and use suggestions

Pre-buried foundation:

The foundation platform or foundation pit needs to be designed in advance;

Set up drainage slope and sedimentation tank.

Layout of electric control box:

It is recommended to set it in the guardhouse or rainproof electric control cabinet;

With manual/automatic switching and emergency power-off functions.

Purification and maintenance:

Regularly clean the sedimentation tank and grille plate;

Regularly inspect the water pump, nozzle, and filter.

Winter use:

Optional installation of antifreeze cable and water heating system;

Use insulation pump room or enclosure to prevent freezing.

Supporting materials:

CAD construction drawing or installation layout drawing

Business quotation template (including configuration options)

Comparative analysis of multiple brands and models (domestic and imported)

Brochure copy (Chinese and English)

Standard format of project bidding documents